View A102VW01-V1_7868370.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

version 1 total pages 18 date 2003.0 5 .26 product specification 10.2 ?a color tft - lcd module ( ?? ) preliminary specification ( ?.. ) final specification model name: a10 2 vw0 1 note: the content of this specification is subject to change. ? 2002 au optronics all rights rese rved, do not copy. free datasheet http://
record of revision version revise date page content 1 26/may./2003 0 first draft. free datasheet http://
version : 1 page : 1 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. contents: a. physical specification ..................................................... p3 b. electrical specifications ................................................... p4 1. pin assignm en t ............................................................ p4 a. tft - lcd panel driving section ........................................... p4 b. backlight driving section ................................................. p5 2. absolute maximum ratings .. ................................................ p5 3. electrical characteristics .................................................... p6 a. typical operating conditions ............................................. p6 b. current consumption .............. ...................................... p6 c. backlight driving conditions ......................................... p6 4. ac timing ................................................................. p7 a. timing conditions .................................. ..................... p7 b. timing diagram ......................................................... p7 c. optical specifications ................................................... p8 d. reliability test items ............................................ ........... p10 e. packing form ............................................................... p11 free datasheet http://
version : 1 page : 2 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. appendix: fig.1 outline dimension of tft - lcd module (front side) .......... p12 fig. 2 outline dimension of tft - lcd module (rear side) p1 3 fig. 3 ope ration mode 1 .................................................... p14 fig. 4 operation mode 2 .............................................. p15 fig. 5 horizontal timing ..................................................... p16 fig.6 vertical shift timing p17 fig.7 vertical timing (from up to down) p18 free datasheet http://
version : 1 page : 3 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. a. physical specifications no. item specification remark 1 display resolution(dot) 800rgb (w) ?? 4 80(h) 2 active area(mm) 222 .0 ( w) ?? 133. 2 (h) 3 screen size(inch) 10. 2 (diagon al) 4 pixel pitch(mm) 0. 1905 (w) ?? 0. 1905 (h) 5 color configuration r. g. b. stripe 6 overall dimension(mm) 235.0 (w) ?? 145. 8 (h) ?? 5.9( d) note 1 7 weight(g) 305 ? 10 8 surface treatment a nti - g lare 9 backlight unit ccfl note 1: refer to fig.1 and fig.2 free datasheet http://
version : 1 page : 4 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. b. electrical specifications 1. absolute maximum ratings product specification items symbol min. typ. max. unit vcc - 0.5 5 v avdd - 0.5 12 v vgh - 0.3 18 v vgl - 15 0.3 v power voltage vgh - vgl 33 v vi - 0.3 vcc+0.3 v vref(v1~v8) 0.4avdd avdd+0.3 v vref(v8~v14) - 0.3 0.6avdd v input si gnal voltage vcom 4.2 v operating temperature topa - 30 85 j storage temperature tstg - 40 95 j 2. typical operating conditions (gnd=a vss =0v) product specification items symbol min. typ. max. unit vcc 3.0 3.3 3.6 v avdd ( 7.8 ) ( 8.4 ) ( 9.0 ) v vgh 14.3 15 15.7 v vcom (4.2) v power voltage vgl - 10.5 - 10 - 9.5 v v1~v 5 0.4avdd ?x avdd - 0.3 v input reference voltage v 6 ~v1 0 0.1 ?x 0.6avdd v vih 0.8vcc ?x vcc v input h/l level voltage vil 0 ?x 0.2vcc v 3. current consumption conditions(gnd=avss= 0v) parameter symbol condition min. typ. max. unit igh vgh=15v ( 50 ) ( 100 ) ua igl vgl= - 10v ( - 0.2 ) ( - 0.6 ) u a icc vcc= 5 v (3 .5 ) (5) ma current for dri ver idd avdd=5v ( 2 0) ( 30 ) ma free datasheet http://
version : 1 page : 5 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. 4. backlight driving conditions parameter symbol condition min. typ. max. unit lamp life time - - 25,000 40,000 - hours voltage v l 6 1 0 660 vrms current i l 6.0 7.0 ma frequency f l 60 80 khz t=25 j 930 vrms t=0 j 1,220 vrms lamp start voltage vs t= - 20 j tbd vrms the? lamp life time? is defined as the module brightness decrease to 50% original brightness at ta=25 j , i l =6ma . 5. timing conditions ac electrical characteristics (vcc=3.3v, avdd=8.4v, avss=gnd=0v, ta=25 j ) parameter symbol min. typ. max. unit clk frequency fclk 40 42 mhz clk pulse width tcw 6 ns data set - up time tsu 4 ns data hold time thd 2 ns propagatio n delay of dio 2 / 1 tphl 6 10 15 ns time that the last data to ld tld 1 tcw pulse width of ld twld 2 tcw time that ld to dio1/2 tlds 5 tcw pol set - up time tpsu 6 ns pol hold time tphd 6 ns oev pulse width toev 12 tcw ckv pulse width tckv 1 6 28 40 tcw horizontal display start tsh 0 tcw/3 horizontal display timing range tdh 800 tcw/3 stv setup time tsuv 400 ns stv hold time thdv 400 ns stv pulse width tstv 1 tdh horizontal lines per field tv 512 525 610 tdh vertical display s tart tsv 3 tdh vertical display timing range tdv 480 tdh dc electrical characteristics parameter symbol min. typ. max. unit supply voltage vcc 2.7 3.3 3.6 v low level input voltage vil 0 - 0.3*vcc v high level input voltage vih 0.7*vcc - vcc v h igh level output voltage voh vcc - 0.4 - - v low level output voltage vol gnd - gnd+0.4 v supply voltage avdd (6.5) (8.4) (10) v sinking current of outputs iol | - 80| - - ua driving current of outputs ioh 80 - - ua free datasheet http://
version : 1 page : 6 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. 1.pin assignment a. tft - lcd panel drivi ng section (1.) fh12 - 3 0s - 0.5sh(hirose) ?x fpc i/o pin assignment pin no symbol i/o description remark 1 (pol) o polarity selection 2 dio2 i/o vertical start pulse signal input or output 3 oe i output enable 4 cpv i vertical clock 5 dio1 i vertical start pulse signal input or output 6 gnd i power ground 7 (edgsl) i select rising edge or rising/falling edge 8 vcc i digital voltage for source driver 9 (v12) i gamma voltage level 12 10 vgl i gate off voltage 11 (v14) i gamma voltage level 14 1 2 vgh i gate on voltage 13 (v13) i gamma voltage level 13 14 u/d i up/down selection 15 vcom1 i common voltage 16 gnd i power ground 17 avdd1 i power supply for analog circuit 18 v10 i gamma voltage level 10 19 v8 i gamma voltage level 8 2 0 v6 i gamma voltage level 6 21 v4 i gamma voltage level 4 22 v2 i gamma voltage level 2 23 gnd i power ground 24 r5 i red data(msb) 25 r4 i red data 26 r3 i red data 27 r2 i red data 28 r1 i red data 29 r0 i red data(lsb) 30 gnd i pow er ground free datasheet http://
version : 1 page : 7 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. pin no symbol i/o description remark 3 1 gnd i power ground 3 2 g5 i green data(msb) 3 3 g4 i green data 3 4 g3 i green data 3 5 g2 i green data 3 6 g1 i green data 3 7 g0 i green data(lsb) 3 8 sthl i/o horizontal start pulse signa l input or output 3 9 inv i control signal are inverted or not 4 0 gnd i power ground 41 dclk i sample clock 42 dvdd i voltage for digital circuit 43 sthr i/o horizontal start pulse signal input or output 44 ld i latches the polarity of outputs and switches the new data to outputs 45 b5 i blue data (msb) 46 b4 i blue data 47 b3 i blue data 48 b2 i blue data 49 b1 i blue data 50 b0 i blue data (lsb) 51 r/l i right/ left selection 52 v1 i gamma voltage level 1 53 v3 i gamma volta ge level 3 5 4 v5 i gamma voltage level 5 5 5 v7 i gamma voltage level 7 56 v9 i gamma voltage level 9 57 v11 i gamma voltage level 11 58 avdd2 i voltage for analog circuit 59 gnd i power ground 60 vcom2 i common voltage free datasheet http://
version : 1 page : 8 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. c. optical speci fication (note 1, note 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf c =0 x - - 12 18 24 36 ms ms note 3,5 contrast ratio cr at optimized v i ewing angle 250 300 - note 4, 5 viewing angle top bottom left right cr ? 10 40 5 0 5 0 5 0 50 60 60 60 - - - - deg . note 5, 6 brightness y l i l =6ma, 25 j 400 45 0 - nit note 7 x c =0 x 0.26 0.31 0.36 white chromaticity y c =0 x 0.28 0.33 0.38 note 7 note 1 : ambient temperature =25 j , and lamp current i l = 6 marms. to be meas ured in the dark room. dc/ac inverter driving frequency: 60 khz. note 2 :to be measured on the center area of panel with a viewing cone of 1 x by topcon luminance meter bm - 5, after 10 minutes operation. note 3. definition of response time: the output signals of photo detector are measured when the input signals are changed from ?black? to ?white?(falling time) and from ?white? to ?black?(rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refe r to figure as below. note 4. definition of contrast ratio: contrast ratio is calculated with the following formula. contrast ratio (cr)= signal(relative value) "black" tr tf "white" "white" 0 % 10 % 90 % 100 % photo detector output when lcd is at ?white? state photo detector output when lcd is at ?black? state free datasheet http://
version : 1 page : 9 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. note 5. white vi=v i50 ?? 1.5v black vi=v i50 ? 2.0v ? ? ? means that the analog input signal swings in phase with v com signal. ? ? means that the analog input signal swings out of phase with v com signal. v i50 : the analog input voltage when transmission is 50% the 100% transmission is defined as the transmission of lcd panel when all the in put terminals of module are electrically opened. note 6. definition of viewing angle, refer to figure as below. note 7. measured at the center area of the panel when all the input terminals of lcd panel are electrically opened. free datasheet http://
version : 1 page : 10 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. d. reliability test i tems(note 2): no. test items conditions remark 1 high temperature storage ta= 85 j 240h rs 2 low temperature storage ta= - 30 j 240h rs 3 high temperature operation ta= 70 j 240h rs 4 low temperature operation ta= - 2 0 j 240h rs 5 high temperature and high humidity ta= 60 j , 90% rh 240h rs operation 6 heat shock - 30 j ~ 85 j /100 cycles 1hrs/cycle non - operation 7 electrostatic discharge ? 200v,200pf(0 [ ) , once for each terminal non - operation frequency range : 8~33.3hz stoke : 1.3mm sweep : 2.9g, 33.3 ~ 400hz cycle : 15 minutes 2 hours for each direction of x,z 8 vibration 4 hours for y direction jis c7021, a - 10 condition a 9 mechanical shock 100g, 6ms, ? x, ? y, ? z 3 times for each direction jis c7021, a - 7 condition c 10 vibration (with car ton) random vibration: 0.015g 2 /hz from 5~200hz ? 6db/octave from 200~500hz iec 68 - 34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces jis z0202 note 1 : ta: ambient temperature. n ote2: in the standard conditions, there is not display functio n ng issue occurred. all the cosmetic specification is judged before the reliability stress. free datasheet http://
version : 1 page : 11 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. e. packing form tbd free datasheet http://
version : 1 page : 12 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. 2:general tolerance ?g 0.3mm note ?g 1:6 o'clock direction is the optimum viewing angle fig.1 outline dimension of tft - lcd module (front side) connector: bhsr - 02vs - 1 free datasheet http://
version : 1 page : 13 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. fig. 2 outline dimension of tft - lcd module (rear side) free datasheet http://
version : 1 page : 14 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. fig. 3 operation mode 1 free datasheet http://
version : 1 page : 15 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. fig. 4 operation mode 2 free datasheet http://
version : 1 page : 16 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. fig. 5 horizontal timing free datasheet http://
version : 1 page : 17 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. stvl(r) ckv 50 % 50 % t suv hdv t t ckv fig. 6 virtical shift clock timing free datasheet http://
version : 1 page : 18 /18 all rights strictly reserved. any portion of this paper shall not b e reproduced, copied, or transformed to any other forms without permission from unipac optoelectronics corp. (vsy) (hsy) t sv fig. 7 vertical timing (from up to down) fig. 7 vertical tim ing (from up to down) display on panel first line (hsy) (vsy) stvl pol (odd field) pol (even field) free datasheet http://

▲Up To Search▲

Price & Availability of A102VW01-V1

	To Download A102VW01-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .